Upgrade your classic or vintage vehicle with dependable and efficient ignition performance. The Mr CarMan Electronic Ignition System is a universal plug-and-play solution that converts traditional points-based ignition into a modern electronic setup while keeping your original distributor and coil in place.
This system improves spark strength, starting performance, and overall drivability without altering the originality of the vehicle.
Compatibility: Works with 2, 3, 4, 5, 6, and 8-cylinder petrol engines Supports both 6V and 12V systems For manual points distributors Compatible with some vintage motorcycles, including Moto Guzzi, BMW Boxer engines, and certain Japanese makes
Key Benefits: Uses existing stock distributor, coil, and points Compatible with any good 1.5 ohm or higher aftermarket coil Eliminates wear and arcing on points Extends spark plug life Provides consistent full-voltage spark Improves cold start performance Improves idle stability and engine response Reduces emissions Improves fuel economy Helps keep engine oil cleaner Allows longer intervals between oil changes
Installation Overview (Negative Earth Vehicles): Mount the module away from engine heat Remove the original condenser Connect red wire to coil positive (+15) Connect black wire to coil negative (-) Secure brown earth wire to clean body metal Purple wire connects to distributor where the condenser was fitted Set points gap to 0.5 mm (or 0.3 mm for high-RPM setups) Adjust timing as normal after installation
Important notes: Do not leave ignition switched on with the engine not running Ensure earth straps are clean and secure Alternator charge should be stable at around 13.8V Vehicle wiring, distributor, and coil must be in good working condition Can be used on positive-earth vehicles only after converting to negative earth
